Coilover Suspension Lowering Kits compatible for Dodge Charger 06-10 and compatible for SRT-8 Adj. Damper Coil Spring
Compatible For 2009-2010 compatible for Dodge Challenger R/T 5.7L V8 RWD, Coupe;
Compatible For 2009-2010 compatible for Dodge Challenger SE 3.5L V6 RWD, Coupe;
Compatible For 2008-2010 compatible for Dodge Challenger SRT8 6.1L V8 RWD, Coupe;
Compatible For 2006-2007 compatible for Dodge Charger Base 2.7L V6 RWD, Sedan;
Compatible For 2007 compatible for Dodge Charger Base 2.7L V6 RWD, Sedan;
Compatible For 2006 compatible for Dodge Charger Daytona R/T 5.7L V8 RWD, Sedan;
Compatible For 2006-2010 compatible for Dodge Charger R/T 5.7L V8 RWD, Sedan;
Compatible For 2006-2010 compatible for Dodge Charger SE 2.7L/3.5L V6, 5.7L V8, RWD, Sedan;
Compatible For 2006-2010 compatible for Dodge Charger SRT8 6.1L V8, RWD, Sedan;
Compatible For 2006-2010 compatible for Dodge Charger SXT 3.5L V6, RWD, Sedan
Top mounts: front - pillow ball top mounts
rear – rubber top mounts
Damping: 24 levels rebound damping adjustable
Spring rate Front: 12 kg/mm (672 lbs/in)
Spring rate Rear: 14 kg/mm (784 lbs/in)
Spring length Front: 230mm
Spring length Rear: 240mm
Adjustable height: lowering 1-3 inch
Coilover overall length Front: 510mm-600mm
Coilover overall length Rear: 570mm-630mm
Shock type: Twin tube
Spring preload: 7-10 mm
complete coilovers for 2 front and 2 rear
a pair wrench for height adjustment
size: 71*51*21 cm
1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance
2. A 24 rebound damping adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.
3. Twin-Tube structure allows sufficient stroke within the shock absorber.
4. Separate height adjustment does not affect damper stroke.
5. High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus, the special surface treatment improves the durability and performance.
6. Height Adjustment tools included.
7. Pillow ball top mount - It improves the steering feel and response.
8. Most pieces in our coilover systems, including mounts, collars and spring perches, are designed from 6061-T6 Billet Aluminum resulting in lightweight, durable and rust resistant components.
9. Full rebuildable.
- * * Fitment: The shock absorbers are compatible for Dodge Challenger 2008-2010, compatible for Dodge Challenger SRT8 2008-2010, compatible for Dodge Charger SRT8 2006-2010, compatible for Dodge Magnum 2005-2008, RWD application
- * * High-quality Spring: Front: 12 kg/mm (672 lbs/in), Rear: 14 kg/mm (784 lbs/in); The spring distortion is less than 0.04% under 600,000 times continuously tests
- * * Adjustable Performance: Adjustable ride height (lowering 1''-3''); Adjustable pre-load spring tension; Adjustable camber plate; 24 ways Adjustable Damper
- * * Increased Hardness: Most components of the suspension parts are made from 6061 aluminum with T6 for increased strength and rigidity
- * * Pillow ball top mount: Pillow ball bearing top mounts for camber adjustment are designed to combat noise while tuning and offer greater feed back